#Motorcycle red patina paint job full#
#Motorcycle red patina paint job pro#
#Motorcycle red patina paint job code#
#Motorcycle red patina paint job windows#

This goes on glossy so I had to wait about a 1/2 hour to see how it was going to dull out.

The clearcoat I used was House of Kolor UC-35 and the flattening agent was One Choice SU-4985.Ģ very good wetcoats were applied. Once I was satisfied with the overall look, I blew and tacked off the Suburban. Did some fine tuning using a red scotchbrite. Anxious to get this done, I started early morning.

I was going to clearcoat it that day, but opted not to as I destroyed the booth with masking paper, sandpaper and other misc. I did this on both the white and the teal color. Then using a special candy mix, I did some shading giving the paint a surface rust effect. I did some ‘splatter’ work giving areas the look of surface rust. I sanded through various areas giving the paint job the weathered look. Saturday AM I did a LOT of hand sanding using 180, 320 and red scotch bright pads. The Chevy Suburbans came with the roof as the 2 tone color as well.

#Motorcycle red patina paint job windows#

GMC Suburbans came with a 2 tone whereas the area around the side windows were white and the rest the main color. Once I did the above coats, then it was time to do the white section, then the teal. Once I got this paint, I tinted even more to give it an authentic old school red oxide primer look. Of course this was not available in the economy Omni basecoat, so I had to get Deltron. The red oxide was a ‘underhood’ color that I found in the color chips. I used these as backup incase while giving the paint the patina look, I sanded through the ‘red oxide primer’ looking basecoat. The topped that off with a couple coats of a darker solid gray. The fun began at 1:30 or so when I laid down a couple coats of light gray sealer. Lot’s of masking since I wanted to do the fawn metallic door insides along with the all teal jams. New primed aftermarket fenders went on the Suburban. My YouTube Channel (how-tos, projects, paint jobs…)Īfter 2 months of hard labor I finally painted the 1963 GMC Suburban Custom.ġ00+ hours went into all the work including replacing the right floor pan, inner rocker, and left floor pan.Įxtensive bodywork including some dents and the usual rust.Īll panels were stripped to metal.

#Motorcycle red patina paint job pro#

My 1963 Pro Street C10 (back halved frame off I did this back in 1992) Video My 1966 Chevy C-10 (see monthly updates toward the top once you get to the page) My 1973 Montego MX (see monthly updates toward the top once you get to the page) My 1963 GMC Suburban “Custom” (FOR SALE) Fauxtina/Patina paint job FS page – Gallery – Video My 1966 GMC Suburban ” Custom” Project (started January 2021)

#Motorcycle red patina paint job code#

1972 Mercury Montego N Code 429 – RestoMod.Attitude Custom Painting Testimonials – 5/2004 back to 2002.Attitude Custom Painting Testimonials – 5/2006 back to 10/2005.Attitude Custom Painting Testimonials – 4/2006 back to 1/2006.Attitude Custom Painting Testimonials – 4/2008 back to 1/2006.Attitude Custom Painting Testimonials – 9/2008 back to 12/2007.Attitude Custom Painting Testimonials – 6/2008 to – 12/2010.PLEASE NOTE - To get the crackle effect you must use a basecoat from either the Montana Gold or White ranges of colours or it will not work.

#Motorcycle red patina paint job full#

You can download the full brochure on the complete Montana Cans Tech Range The crackle range is available in 6 RAL colours, this is the 'Patina Green' Colour option. While spraying, for the best coating results, we recommend that you change directions (cross-coat) to achieve optimum coverage. Give the paint a minimum of 45min but no longer than 24hours drying time before applying your colour of CRACKLE effect. The crackle effect paint works as follows, apply a base coat of your desired colour from the Montana GOLD or WHITE paint range, remember the base coat is the colour that will appear in the cracks. Montana have produced this range of ' Crackle Effect Spray Paint' for a special vintage/used look, the application process is very simple and with a bit of preparation is very easy to achieve, we suggest you watch the tutorial video next to the product image, this video will explain most things for you and help you to achieve the desired effect.